ASQ Certified Quality Inspector 認定 CQI 試験問題:

1. According to Juran, the three basic processes used to manage quality are Response:

A) control, goals, and auditing
B) planning, assurance, and auditing
C) planning, control, and improvement
D) planning, accounting, and inspection

2. How many grams are in 1.23 kilograms?
Response:

A) 12300 grams
B) 1230 grams
C) 0.00123 grams
D) 123 grams

3. Given the batch size (lot size), inspection level (LTPD), and AQL value, which of the following sampling plans would be most appropriate to determine the sample size and acceptance criteria?
Response:

A) Variables single for defective.
B) Stratified plan.
C) Sequential plan.
D) ANSI Z1.4.

4. At startup, a sample was selected for first article inspection. Production continued while the sample was inspected in the QC lab.
In-process inspections using an AQL sampling plan were performed pending first piece inspection results. The first article inspection result indicated the length of the first piece was at the maximum specification limit.
Which of the following would be the most appropriate action to take?
Response:

A) Correct the setup and use the in-process AQL sampling inspection results to determine the quality of parts made between the time the sample was selected and when the measurement was found.
B) Do nothing since the first piece was technically inside the specification limits and production has already started.
C) Place all items manufactured since startup on hold for another AQL sampling and corrective action on the machine setup.
D) Place all items manufactured since startup on hold pending 100% re-inspection and corrective action on the machine setup.

5. Solve for x: 3x + 7 = x + 17
Response:

A) 2
B) 3
C) 4
D) 5

質問と回答：