最新のC4040-109問題集で試験を準備する

IBM C4040-109 試験概要:

IBM C4040-109 試験シラバストピック:

IBM Virtualization Technical Support for AIX and Linux - v2 認定 C4040-109 試験問題：

1. An administrator must remove any installed efixes before attempting to install a new VIO Fix Pack. Which VIO command will advise if any VIO efixes are actually present?

A) lssw
B) emgr
C) lslpp
D) oem_platform_level

2. A system has 2 LPARs and a VIO Server with networking configured as follows:

LPAR1 and LPAR2 are unable to communicate with external systems. What should be done to allow them to access the external network?

A) LPAR1 and LPAR2 should configure 802.1Q adapters in their Operating System.
B) 802.1Q should be disabled on the VIO Virtual Network Adapter.
C) VIO should use another VLAN ID on its Virtual Network Adapter.
D) LPAR1 and LPAR2 Virtual Network Adapters should be configured with Access External Network

3. After applying the latest Fix Pack to a VIO server, the administrator finds an issue with the hosted media repository. The lsrep command fails with the following error:
"Unable to retrieve repository date due to incomplete repository structure"
What is the most likely cause for this error?

A) The VIO server has not been rebooted since applying the Fix Pack.
B) The Fix Pack reset the date and time to the shipped default.
C) The repository was in a loaded state prior to applying the Fix Pack.
D) The reboot caused the repository to forcibly unmount.

4. The wlmstat -@ 2 command has been run from a global environment with the following results:

What action can an administrator take to set limits, so that both server1 and server2 use the same amount of CPU resources?

A) Use the chsysres command to assign the same CPU attributes to both servers.
B) Use the cpu_deallocate -P command to reduce the CPU resources on server2
C) Use the syncwpar -E command to copy the CPU resource allocation from server1 to server2.
D) Use the chwpar -R command to set the CPU attributes for each server.

5. An administrator needs to install AIX on 50 LPARs on a new Power 795. All partitions require the same level of customization and the same version of AIX. For security reasons, NIM cannot be used in this environment.
The new system has a single DVD RAM drive. A Single VIO partition has already been configured.
Which of the following will allow the administrator to install the partitions in the shortest possible time?

A) Allocate a DVD RAM device to the first partition.
Build and customize the first partition.
Create a mksysb of the partition to DVD RAM.
Use the DVD RAM image to install the remaining partitions.
B) Map a virtual optical DVD RAM device from the HMC to the first parttion.
Build and customize the first partition.
Create a mksysb of the partition to DVD RAM
Use the DVD RAM image to install the remaining partitions.
C) Build and customize the first partition from DVD RAM.
Create a mksysb and use to build a bootable ISO image.
Install the ISO image in the virtual media library on a VIO server partition.
Install remaining clients using image mapped from virtual media library.
D) Build and customize the first partition from DVD RAM.
Create a mksysb of the partition and copy to the HMC.
Configure NIMOL on the HMC.
Install the remaining clients using NIMOL.

質問と回答：