Nortel WLAN 2300 Rls.7.0 implementation and Management 認定 920-271 試験問題:

1. Nortel WLAN 2300 series has numerous options for monitoring the Wireless LAN. There are also multiple utilities used to monitor and troubleshoot the current status of wireless devices. Which procedure gives the most detail for a single Wireless Security Switch
(WSS)?

A) the trace command executed from the command line interface
B) client monitor inside WMS 2300
C) status summary inside WMS 2300
D) the show command executed from the command line interface

2. You can configure Known SSIDs entries in the Wireless Management System (WMS).
What is true about the Known SSID list?

A) An empty Known SSID list implicitly allows all SSIDs.
B) Adding an SSID to the list disallows that SSID.
C) An empty Known SSID list implicitly disallows all SSIDs.
D) Adding an SSID to the list indicates a rogue device.

3. You have planned a WLAN network using the WLAN Management System (WMS). You have also calculated the coverage your antennas provide. What else should you do to ensure adequate coverage?

A) use WMS to calculate the available bandwidth for the network
B) install an access point at the site and check your handset connection to it
C) measure the distance between access points to ensure adequate coverage
D) conduct a site survey to determine actual radio wave strength at various locations at the site

4. A rogue access point (AP) has been detected and reported. What is the next step in stopping the rogue AP from communicating with new and existing clients?

A) The rogue AP MAC address should be added to the Neighborhood list.
B) The rogue MAC address is added to the rogue list.
C) The rogue AP IP address should be added to the Rogue list.
D) The rogue AP IP address should be added to the Organizationally Unique Identifier
(OUI).

5. What is the major benefit of configuring the WLAN Security Switch (WSS) for PEAP as an authentication method?

A) It provides mutual authentication between the client and the authentication server.
B) The client is required to authenticate using the WLAN firewall.
C) The shared key scheme, meaning the client and AP, must both have the same key.
D) PEAP greatly reduces jamming attacks against the WLAN.

質問と回答：